4coder/site/source_material/binding_list.txt

\INCLUDE{site_header.txt}

4coder version \VERSION

\SECTION{Built in Bindings}
\ITEM \STYLE{code} "default" \END The default 4coder bindings - typically good for Windows and Linux
\ITEM \STYLE{code} "mac-default" \END Default 4coder bindings on a Mac keyboard
\END

\SECTION{4coder Long Command}
Long name commands that can be typed in after using the "long command" command for infrequently triggered commands.
\LIST
\ITEM \STYLE{code} "load project" \END Load a project.4coder file, ditching any previously loaded project
\ITEM \STYLE{code} "open all code" \END Open all code files in the current directory, extensions set in config.4coder, default to C/C++ extensions
\ITEM \STYLE{code} "open all code recursive" \END Like \STYLE{code} "open all code" \END but recurses through folders
\ITEM \STYLE{code} "dos lines" \END Switch the buffer to 'dos' line ending mode CRLF
\ITEM \STYLE{code} "nix lines" \END Switch the buffer to 'nix' line ending mode LF
\ITEM \STYLE{code} "remap" \END Change to one of the built in command bindings
\ITEM \STYLE{code} "new project" \END Setup a new project.4coder and accompanying build scripts
\ITEM \STYLE{code} "delete file" \END Delete the file attached to the current buffer and close the buffer
\ITEM \STYLE{code} "rename file" \END Rename the file attached to the current buffer and reopen the buffer
\ITEM \STYLE{code} "mkdir" \END Make a new directory in 4coder's hot directory
\END
\END
\SECTION{Map: default}
\SECTION{mapid-global}
The following bindings apply in all situations.
\LIST
\ITEM \STYLE{code} <ctrl ,> \END Change the currently active panel, moving to the panel with the next highest view_id.
\ITEM \STYLE{code} <ctrl <> \END Change the currently active panel, moving to the panel with the next lowest view_id.
\ITEM \STYLE{code} <ctrl n> \END Interactively creates a new file.
\ITEM \STYLE{code} <ctrl o> \END Interactively open a file out of the file system.
\ITEM \STYLE{code} <alt o> \END Interactively opens a file in the other panel.
\ITEM \STYLE{code} <ctrl k> \END Interactively kill an open buffer.
\ITEM \STYLE{code} <ctrl i> \END Interactively switch to an open buffer.
\ITEM \STYLE{code} <ctrl h> \END Changes 4coder's hot directory to the root directory of the currently loaded project. With no loaded project nothing hapepns.
\ITEM \STYLE{code} <ctrl S> \END Saves all buffers marked dirty (showing the '*' indicator).
\ITEM \STYLE{code} <alt .> \END If the special build panel is open, makes the build panel the active panel.
\ITEM \STYLE{code} <alt ,> \END If the special build panel is open, closes it.
\ITEM \STYLE{code} <alt n> \END If a buffer containing jump locations has been locked in, goes to the next jump in the buffer, and does not skip sub jump locations.
\ITEM \STYLE{code} <alt N> \END If a buffer containing jump locations has been locked in, goes to the previous jump in the buffer, and does not skip sub jump locations.
\ITEM \STYLE{code} <alt M> \END If a buffer containing jump locations has been locked in, goes to the first jump in the buffer.
\ITEM \STYLE{code} <alt m> \END Looks for a build.bat, build.sh, or makefile in the current and parent directories.  Runs the first that it finds and prints the output to *compilation*.  Puts the *compilation* buffer in a panel at the footer of the current view.
\ITEM \STYLE{code} <alt b> \END Toggles the visibility status of the current view's filebar.
\ITEM \STYLE{code} <alt z> \END Queries for an output buffer name and system command, runs the system command as a CLI and prints the output to the specified buffer.
\ITEM \STYLE{code} <alt Z> \END If the command execute_any_cli has already been used, this will execute a CLI reusing the most recent buffer name and command.
\ITEM \STYLE{code} <alt x> \END Opens an interactive list of all registered commands.
\ITEM \STYLE{code} <ctrl I> \END Creates a lister of locations that look like function definitions and declarations in the buffer.
\ITEM \STYLE{code} <alt E> \END Attempts to close 4coder.
\ITEM \STYLE{code} <f1> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f2> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f3> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f4> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f5> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f6> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f7> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f8> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f9> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f10> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f11> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f12> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f13> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f14> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f15> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f16> \END Run an 'fkey command' configured in a project.4coder file.  Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.