4coder/site/source_material/binding_list.txt

348 lines
36 KiB
Plaintext

\INCLUDE{site_header.txt}
4coder version \VERSION
\SECTION{Built in Bindings}
\ITEM \STYLE{code} "default" \END The default 4coder bindings - typically good for Windows and Linux
\ITEM \STYLE{code} "mac-default" \END Default 4coder bindings on a Mac keyboard
\END
\SECTION{4coder Long Command}
Long name commands that can be typed in after using the "long command" command for infrequently triggered commands.
\LIST
\ITEM \STYLE{code} "load project" \END Load a project.4coder file, ditching any previously loaded project
\ITEM \STYLE{code} "open all code" \END Open all code files in the current directory, extensions set in config.4coder, default to C/C++ extensions
\ITEM \STYLE{code} "open all code recursive" \END Like \STYLE{code} "open all code" \END but recurses through folders
\ITEM \STYLE{code} "dos lines" \END Switch the buffer to 'dos' line ending mode CRLF
\ITEM \STYLE{code} "nix lines" \END Switch the buffer to 'nix' line ending mode LF
\ITEM \STYLE{code} "remap" \END Change to one of the built in command bindings
\ITEM \STYLE{code} "new project" \END Setup a new project.4coder and accompanying build scripts
\ITEM \STYLE{code} "delete file" \END Delete the file attached to the current buffer and close the buffer
\ITEM \STYLE{code} "rename file" \END Rename the file attached to the current buffer and reopen the buffer
\ITEM \STYLE{code} "mkdir" \END Make a new directory in 4coder's hot directory
\END
\END
\SECTION{Map: default}
\SECTION{mapid-global}
The following bindings apply in all situations.
\LIST
\ITEM \STYLE{code} <ctrl p> \END Create a new panel by vertically splitting the active panel.
\ITEM \STYLE{code} <ctrl _> \END Create a new panel by horizontally splitting the active panel.
\ITEM \STYLE{code} <ctrl P> \END Closes the currently active panel if it is not the only panel open.
\ITEM \STYLE{code} <ctrl ,> \END Change the currently active panel, moving to the panel with the next highest view_id.
\ITEM \STYLE{code} <ctrl <> \END Change the currently active panel, moving to the panel with the next lowest view_id.
\ITEM \STYLE{code} <ctrl n> \END Interactively creates a new file.
\ITEM \STYLE{code} <ctrl o> \END Interactively opens or creates a new file.
\ITEM \STYLE{code} <alt o> \END Reads a filename from surrounding '"' characters and attempts to open the corresponding file, displaying it in the other view.
\ITEM \STYLE{code} <ctrl k> \END Interactively kill an open buffer.
\ITEM \STYLE{code} <ctrl i> \END Interactively switch to an open buffer.
\ITEM \STYLE{code} <ctrl h> \END Changes 4coder's hot directory to the root directory of the currently loaded project. With no loaded project nothing hapepns.
\ITEM \STYLE{code} <ctrl H> \END If a project file has already been loaded, reloads the same file. Useful for when the project configuration is changed.
\ITEM \STYLE{code} <ctrl S> \END Saves all buffers marked dirty (showing the '*' indicator).
\ITEM \STYLE{code} <alt c> \END Opens the 4coder colors and fonts selector menu.
\ITEM \STYLE{code} <alt d> \END Opens a debug view for internal use.
\ITEM \STYLE{code} <alt .> \END If the special build panel is open, makes the build panel the active panel.
\ITEM \STYLE{code} <alt ,> \END If the special build panel is open, closes it.
\ITEM \STYLE{code} <alt n> \END If a buffer containing jump locations has been locked in, goes to the next jump in the buffer, and does not skip sub jump locations.
\ITEM \STYLE{code} <alt N> \END If a buffer containing jump locations has been locked in, goes to the previous jump in the buffer, and does not skip sub jump locations.
\ITEM \STYLE{code} <alt M> \END If a buffer containing jump locations has been locked in, goes to the first jump in the buffer.
\ITEM \STYLE{code} <alt m> \END Looks for a build.bat, build.sh, or makefile in the current and parent directories. Runs the first that it finds and prints the output to *compilation*. Puts the *compilation* buffer in a panel at the footer of the current view.
\ITEM \STYLE{code} <alt z> \END Queries for an output buffer name and system command, runs the system command as a CLI and prints the output to the specified buffer.
\ITEM \STYLE{code} <alt Z> \END If the command execute_any_cli has already been used, this will execute a CLI reusing the most recent buffer name and command.
\ITEM \STYLE{code} <alt x> \END Execute a 'long form' command.
\ITEM \STYLE{code} <alt s> \END Sets the current view to show it's scrollbar.
\ITEM \STYLE{code} <alt w> \END Sets the current view to hide it's scrollbar.
\ITEM \STYLE{code} <alt b> \END Toggles the visibility status of the current view's filebar.
\ITEM \STYLE{code} <alt @> \END Toggles the mouse suppression mode, see suppress_mouse and allow_mouse.
\ITEM \STYLE{code} <ctrl page up> \END Toggle fullscreen mode on or off. The change(s) do not take effect until the next frame.
\ITEM \STYLE{code} <alt E> \END Attempts to close 4coder.
\ITEM \STYLE{code} <ctrl +> \END Increase the size of the face used by the current buffer.
\ITEM \STYLE{code} <ctrl -> \END Decrease the size of the face used by the current buffer.
\ITEM \STYLE{code} <f1> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f2> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f3> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f4> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f5> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f6> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f7> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f8> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f9> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f10> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f11> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f12> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f13> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f14> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f15> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f16> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\END
\END
\SECTION{mapid-file}
The following bindings apply in general text files and most apply in code files, but some are overriden by other commands specific to code files.
\LIST
\ITEM \STYLE{code} <any character> \END Inserts whatever character was used to trigger this command.
\ITEM \STYLE{code} <left click> \END Sets the cursor position to the mouse position.
\ITEM \STYLE{code} <left release> \END Sets the mark position to the mouse position.
\ITEM \STYLE{code} <right click> \END Sets the mark position to the mouse position.
\ITEM \STYLE{code} <left> \END Moves the cursor one character to the left.
\ITEM \STYLE{code} <right> \END Moves the cursor one character to the right.
\ITEM \STYLE{code} <delete> \END Deletes the character to the right of the cursor.
\ITEM \STYLE{code} <shift delete> \END Deletes the character to the right of the cursor.
\ITEM \STYLE{code} <backspace> \END Deletes the character to the left of the cursor.
\ITEM \STYLE{code} <shift backspace> \END Deletes the character to the left of the cursor.
\ITEM \STYLE{code} <up> \END Moves the cursor up one line.
\ITEM \STYLE{code} <down> \END Moves the cursor down one line.
\ITEM \STYLE{code} <end> \END Seeks the cursor to the end of the visual line.
\ITEM \STYLE{code} <home> \END Seeks the cursor to the beginning of the visual line.
\ITEM \STYLE{code} <page up> \END Scrolls the view up one view height and moves the cursor up one view height.
\ITEM \STYLE{code} <page down> \END Scrolls the view down one view height and moves the cursor down one view height.
\ITEM \STYLE{code} <ctrl right> \END Seek right for the next boundary between whitespace and non-whitespace.
\ITEM \STYLE{code} <ctrl left> \END Seek left for the next boundary between whitespace and non-whitespace.
\ITEM \STYLE{code} <ctrl up> \END Seeks the cursor up to the next blank line and places it at the end of the line.
\ITEM \STYLE{code} <ctrl down> \END Seeks the cursor down to the next blank line and places it at the end of the line.
\ITEM \STYLE{code} <alt up> \END Swaps the line under the cursor with the line above it, and moves the cursor up with it.
\ITEM \STYLE{code} <alt down> \END Swaps the line under the cursor with the line below it, and moves the cursor down with it.
\ITEM \STYLE{code} <ctrl backspace> \END Delete characters between the cursor position and the first alphanumeric boundary to the left.
\ITEM \STYLE{code} <ctrl delete> \END Delete characters between the cursor position and the first alphanumeric boundary to the right.
\ITEM \STYLE{code} <alt backspace> \END Delete a single, whole token on or to the left of the cursor and post it to the clipboard.
\ITEM \STYLE{code} <alt delete> \END Delete a single, whole token on or to the right of the cursor and post it to the clipboard.
\ITEM \STYLE{code} <ctrl space> \END Sets the mark to the current position of the cursor.
\ITEM \STYLE{code} <ctrl a> \END Queries the user for two strings, and replaces all occurences of the first string in the range between the cursor and the mark with the second string.
\ITEM \STYLE{code} <ctrl c> \END Copy the text in the range from the cursor to the mark onto the clipboard.
\ITEM \STYLE{code} <ctrl d> \END Deletes the text in the range between the cursor and the mark.
\ITEM \STYLE{code} <ctrl D> \END Delete the line the on which the cursor sits.
\ITEM \STYLE{code} <ctrl e> \END Centers the view vertically on the line on which the cursor sits.
\ITEM \STYLE{code} <ctrl E> \END Sets the left size of the view near the x position of the cursor.
\ITEM \STYLE{code} <ctrl f> \END Begins an incremental search down through the current buffer for a user specified string.
\ITEM \STYLE{code} <ctrl F> \END Queries the user for a string and lists all exact case-sensitive matches found in all open buffers.
\ITEM \STYLE{code} <alt F> \END Queries the user for a string and lists all case-insensitive substring matches found in all open buffers.
\ITEM \STYLE{code} <ctrl g> \END Queries the user for a number, and jumps the cursor to the corresponding line.
\ITEM \STYLE{code} <ctrl G> \END Reads the string in the selected range and lists all exact case-sensitive mathces in all open buffers.
\ITEM \STYLE{code} <ctrl j> \END Converts all ascii text in the range between the cursor and the mark to lowercase.
\ITEM \STYLE{code} <ctrl K> \END Kills the current buffer.
\ITEM \STYLE{code} <ctrl l> \END Toggles the current buffer's line wrapping status.
\ITEM \STYLE{code} <ctrl L> \END Create a copy of the line on which the cursor sits.
\ITEM \STYLE{code} <ctrl m> \END Swaps the position of the cursor and the mark.
\ITEM \STYLE{code} <ctrl O> \END Reopen the current buffer from the hard drive.
\ITEM \STYLE{code} <ctrl q> \END Queries the user for two strings, and incrementally replaces every occurence of the first string with the second string.
\ITEM \STYLE{code} <ctrl Q> \END Queries the user for a string, and incrementally replace every occurence of the word or token found at the cursor with the specified string.
\ITEM \STYLE{code} <alt q> \END Queries the user for a string, and incrementally replace every occurence of the string found in the selected range with the specified string.
\ITEM \STYLE{code} <ctrl r> \END Begins an incremental search up through the current buffer for a user specified string.
\ITEM \STYLE{code} <ctrl s> \END Saves the current buffer.
\ITEM \STYLE{code} <ctrl t> \END Begins an incremental search down through the current buffer for the word or token under the cursor.
\ITEM \STYLE{code} <ctrl T> \END Reads a token or word under the cursor and lists all exact case-sensitive mathces in all open buffers.
\ITEM \STYLE{code} <ctrl u> \END Converts all ascii text in the range between the cursor and the mark to uppercase.
\ITEM \STYLE{code} <ctrl v> \END Paste from the top of clipboard and run auto-indent on the newly pasted text.
\ITEM \STYLE{code} <alt v> \END Toggles the current buffer's virtual whitespace status.
\ITEM \STYLE{code} <ctrl V> \END Paste the next item on the clipboard and run auto-indent on the newly pasted text.
\ITEM \STYLE{code} <ctrl x> \END Cut the text in the range from the cursor to the mark onto the clipboard.
\ITEM \STYLE{code} <ctrl y> \END Advances forewards through the undo history.
\ITEM \STYLE{code} <ctrl z> \END Advances backwards through the undo history.
\ITEM \STYLE{code} <ctrl 1> \END Set the other non-active panel to view the buffer that the active panel views, and switch to that panel.
\ITEM \STYLE{code} <ctrl 2> \END Set the other non-active panel to view the buffer that the active panel views, and switch to that panel.
\ITEM \STYLE{code} <ctrl ?> \END Toggles the current buffer's whitespace visibility status.
\ITEM \STYLE{code} <ctrl ~> \END Removes trailing whitespace from all lines in the current buffer.
\ITEM \STYLE{code} <return> \END If the buffer in the active view is writable, inserts a character, otherwise performs goto_jump_at_cursor.
\ITEM \STYLE{code} <shift return> \END If the buffer in the active view is writable, inserts a character, otherwise performs goto_jump_at_cursor_same_panel.
\ITEM \STYLE{code} <shift space> \END Inserts whatever character was used to trigger this command.
\END
\END
\SECTION{default-code-map}
The following commands only apply in files where the lexer (syntax highlighting) is turned on.
\LIST
\ITEM \STYLE{code} <ctrl right> \END Seek right for boundary between alphanumeric characters or camel case word and non-alphanumeric characters.
\ITEM \STYLE{code} <ctrl left> \END Seek left for boundary between alphanumeric characters or camel case word and non-alphanumeric characters.
\ITEM \STYLE{code} <return> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <shift return> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <}> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <)> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <]> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <;> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <#> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <tab> \END Iteratively tries completing the word to the left of the cursor with other words in open buffers that have the same prefix string.
\ITEM \STYLE{code} <ctrl tab> \END Auto-indents the range between the cursor and the mark.
\ITEM \STYLE{code} <shift tab> \END Auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <alt h> \END At the cursor, insert a '// HACK' comment, includes user name if it was specified in config.4coder.
\ITEM \STYLE{code} <alt r> \END At the cursor, insert a block comment.
\ITEM \STYLE{code} <alt t> \END At the cursor, insert a '// TODO' comment, includes user name if it was specified in config.4coder.
\ITEM \STYLE{code} <alt y> \END At the cursor, insert a '// NOTE' comment, includes user name if it was specified in config.4coder.
\ITEM \STYLE{code} <alt D> \END Queries user for string, lists all locations of strings that appear to define a type whose name matches the input string.
\ITEM \STYLE{code} <alt T> \END Reads a token or word under the cursor and lists all locations of strings that appear to define a type whose name matches it.
\ITEM \STYLE{code} <ctrl [> \END At the cursor, insert a '{' and '}' separated by a blank line.
\ITEM \STYLE{code} <ctrl {> \END At the cursor, insert a '{' and '};' separated by a blank line.
\ITEM \STYLE{code} <ctrl }> \END At the cursor, insert a '{' and '}break;' separated by a blank line.
\ITEM \STYLE{code} <alt [> \END Finds the scope enclosed by '{' '}' surrounding the cursor and puts the cursor and mark on the '{' and '}'.
\ITEM \STYLE{code} <alt ]> \END Finds the first scope started by '{' before the cursor and puts the cursor and mark on the '{' and '}'.
\ITEM \STYLE{code} <alt '> \END Finds the first scope started by '{' after the cursor and puts the cursor and mark on the '{' and '}'.
\ITEM \STYLE{code} <alt /> \END Wraps the code contained in the range between cursor and mark with a new curly brace scope.
\ITEM \STYLE{code} <alt -> \END Deletes the braces surrounding the currently selected scope. Leaves the contents within the scope.
\ITEM \STYLE{code} <alt j> \END If a scope is currently selected, and a statement or block statement is present below the current scope, the statement is moved into the scope.
\ITEM \STYLE{code} <alt i> \END Surround the range between the cursor and mark with an '#if 0' and an '#endif'
\ITEM \STYLE{code} <alt 1> \END Reads a filename from surrounding '"' characters and attempts to open the corresponding file.
\ITEM \STYLE{code} <alt 2> \END If the current file is a *.cpp or *.h, attempts to open the corresponding *.h or *.cpp file in the other view.
\ITEM \STYLE{code} <ctrl 0> \END At the cursor, insert a ' = {0};'.
\ITEM \STYLE{code} <ctrl I> \END Creates a jump list of lines of the current buffer that appear to define or declare functions.
\END
\END
\END
\SECTION{Map: mac-default}
\SECTION{mapid-global}
The following bindings apply in all situations.
\LIST
\ITEM \STYLE{code} <cmnd p> \END Create a new panel by vertically splitting the active panel.
\ITEM \STYLE{code} <cmnd _> \END Create a new panel by horizontally splitting the active panel.
\ITEM \STYLE{code} <cmnd P> \END Closes the currently active panel if it is not the only panel open.
\ITEM \STYLE{code} <cmnd ,> \END Change the currently active panel, moving to the panel with the next highest view_id.
\ITEM \STYLE{code} <cmnd <> \END Change the currently active panel, moving to the panel with the next lowest view_id.
\ITEM \STYLE{code} <cmnd n> \END Interactively creates a new file.
\ITEM \STYLE{code} <cmnd o> \END Interactively opens or creates a new file.
\ITEM \STYLE{code} <ctrl o> \END Reads a filename from surrounding '"' characters and attempts to open the corresponding file, displaying it in the other view.
\ITEM \STYLE{code} <cmnd k> \END Interactively kill an open buffer.
\ITEM \STYLE{code} <cmnd i> \END Interactively switch to an open buffer.
\ITEM \STYLE{code} <cmnd h> \END Changes 4coder's hot directory to the root directory of the currently loaded project. With no loaded project nothing hapepns.
\ITEM \STYLE{code} <cmnd H> \END If a project file has already been loaded, reloads the same file. Useful for when the project configuration is changed.
\ITEM \STYLE{code} <cmnd S> \END Saves all buffers marked dirty (showing the '*' indicator).
\ITEM \STYLE{code} <ctrl c> \END Opens the 4coder colors and fonts selector menu.
\ITEM \STYLE{code} <ctrl d> \END Opens a debug view for internal use.
\ITEM \STYLE{code} <ctrl .> \END If the special build panel is open, makes the build panel the active panel.
\ITEM \STYLE{code} <ctrl ,> \END If the special build panel is open, closes it.
\ITEM \STYLE{code} <ctrl n> \END If a buffer containing jump locations has been locked in, goes to the next jump in the buffer, skipping sub jump locations.
\ITEM \STYLE{code} <ctrl N> \END If a buffer containing jump locations has been locked in, goes to the previous jump in the buffer, skipping sub jump locations.
\ITEM \STYLE{code} <ctrl M> \END If a buffer containing jump locations has been locked in, goes to the first jump in the buffer.
\ITEM \STYLE{code} <ctrl m> \END Looks for a build.bat, build.sh, or makefile in the current and parent directories. Runs the first that it finds and prints the output to *compilation*. Puts the *compilation* buffer in a panel at the footer of the current view.
\ITEM \STYLE{code} <ctrl z> \END Queries for an output buffer name and system command, runs the system command as a CLI and prints the output to the specified buffer.
\ITEM \STYLE{code} <ctrl Z> \END If the command execute_any_cli has already been used, this will execute a CLI reusing the most recent buffer name and command.
\ITEM \STYLE{code} <ctrl x> \END Execute a 'long form' command.
\ITEM \STYLE{code} <ctrl s> \END Sets the current view to show it's scrollbar.
\ITEM \STYLE{code} <ctrl w> \END Sets the current view to hide it's scrollbar.
\ITEM \STYLE{code} <ctrl b> \END Toggles the visibility status of the current view's filebar.
\ITEM \STYLE{code} <ctrl @> \END Toggles the mouse suppression mode, see suppress_mouse and allow_mouse.
\ITEM \STYLE{code} <cmnd page up> \END Toggle fullscreen mode on or off. The change(s) do not take effect until the next frame.
\ITEM \STYLE{code} <ctrl E> \END Attempts to close 4coder.
\ITEM \STYLE{code} <ctrl +> \END Increase the size of the face used by the current buffer.
\ITEM \STYLE{code} <ctrl -> \END Decrease the size of the face used by the current buffer.
\ITEM \STYLE{code} <f1> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f2> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f3> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f4> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f5> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f6> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f7> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f8> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f9> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f10> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f11> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f12> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f13> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f14> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f15> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\ITEM \STYLE{code} <f16> \END Run an 'fkey command' configured in a project.4coder file. Determines the index of the 'fkey command' by which function key or numeric key was pressed to trigger the command.
\END
\END
\SECTION{mapid-file}
The following bindings apply in general text files and most apply in code files, but some are overriden by other commands specific to code files.
\LIST
\ITEM \STYLE{code} <any character> \END Inserts whatever character was used to trigger this command.
\ITEM \STYLE{code} <alt any character> \END Inserts whatever character was used to trigger this command.
\ITEM \STYLE{code} <left click> \END Sets the cursor position to the mouse position.
\ITEM \STYLE{code} <left release> \END Sets the mark position to the mouse position.
\ITEM \STYLE{code} <right click> \END Sets the mark position to the mouse position.
\ITEM \STYLE{code} <left> \END Moves the cursor one character to the left.
\ITEM \STYLE{code} <right> \END Moves the cursor one character to the right.
\ITEM \STYLE{code} <delete> \END Deletes the character to the right of the cursor.
\ITEM \STYLE{code} <shift delete> \END Deletes the character to the right of the cursor.
\ITEM \STYLE{code} <backspace> \END Deletes the character to the left of the cursor.
\ITEM \STYLE{code} <shift backspace> \END Deletes the character to the left of the cursor.
\ITEM \STYLE{code} <up> \END Moves the cursor up one line.
\ITEM \STYLE{code} <down> \END Moves the cursor down one line.
\ITEM \STYLE{code} <end> \END Seeks the cursor to the end of the visual line.
\ITEM \STYLE{code} <home> \END Seeks the cursor to the beginning of the visual line.
\ITEM \STYLE{code} <page up> \END Scrolls the view up one view height and moves the cursor up one view height.
\ITEM \STYLE{code} <page down> \END Scrolls the view down one view height and moves the cursor down one view height.
\ITEM \STYLE{code} <cmnd right> \END Seek right for the next boundary between whitespace and non-whitespace.
\ITEM \STYLE{code} <cmnd left> \END Seek left for the next boundary between whitespace and non-whitespace.
\ITEM \STYLE{code} <cmnd up> \END Seeks the cursor up to the next blank line and places it at the end of the line.
\ITEM \STYLE{code} <cmnd down> \END Seeks the cursor down to the next blank line and places it at the end of the line.
\ITEM \STYLE{code} <cmnd backspace> \END Delete characters between the cursor position and the first alphanumeric boundary to the left.
\ITEM \STYLE{code} <cmnd delete> \END Delete characters between the cursor position and the first alphanumeric boundary to the right.
\ITEM \STYLE{code} <ctrl backspace> \END Delete a single, whole token on or to the left of the cursor and post it to the clipboard.
\ITEM \STYLE{code} <ctrl delete> \END Delete a single, whole token on or to the right of the cursor and post it to the clipboard.
\ITEM \STYLE{code} <cmnd /> \END Sets the mark to the current position of the cursor.
\ITEM \STYLE{code} <cmnd a> \END Queries the user for two strings, and replaces all occurences of the first string in the range between the cursor and the mark with the second string.
\ITEM \STYLE{code} <cmnd c> \END Copy the text in the range from the cursor to the mark onto the clipboard.
\ITEM \STYLE{code} <cmnd d> \END Deletes the text in the range between the cursor and the mark.
\ITEM \STYLE{code} <cmnd D> \END Delete the line the on which the cursor sits.
\ITEM \STYLE{code} <cmnd e> \END Centers the view vertically on the line on which the cursor sits.
\ITEM \STYLE{code} <cmnd E> \END Sets the left size of the view near the x position of the cursor.
\ITEM \STYLE{code} <cmnd f> \END Begins an incremental search down through the current buffer for a user specified string.
\ITEM \STYLE{code} <cmnd F> \END Queries the user for a string and lists all exact case-sensitive matches found in all open buffers.
\ITEM \STYLE{code} <ctrl F> \END Queries the user for a string and lists all case-insensitive substring matches found in all open buffers.
\ITEM \STYLE{code} <cmnd g> \END Queries the user for a number, and jumps the cursor to the corresponding line.
\ITEM \STYLE{code} <cmnd G> \END Reads the string in the selected range and lists all exact case-sensitive mathces in all open buffers.
\ITEM \STYLE{code} <cmnd j> \END Converts all ascii text in the range between the cursor and the mark to lowercase.
\ITEM \STYLE{code} <cmnd K> \END Kills the current buffer.
\ITEM \STYLE{code} <cmnd l> \END Toggles the current buffer's line wrapping status.
\ITEM \STYLE{code} <cmnd L> \END Create a copy of the line on which the cursor sits.
\ITEM \STYLE{code} <cmnd m> \END Swaps the position of the cursor and the mark.
\ITEM \STYLE{code} <cmnd O> \END Reopen the current buffer from the hard drive.
\ITEM \STYLE{code} <cmnd q> \END Queries the user for two strings, and incrementally replaces every occurence of the first string with the second string.
\ITEM \STYLE{code} <cmnd Q> \END Queries the user for a string, and incrementally replace every occurence of the word or token found at the cursor with the specified string.
\ITEM \STYLE{code} <cmnd r> \END Begins an incremental search up through the current buffer for a user specified string.
\ITEM \STYLE{code} <cmnd s> \END Saves the current buffer.
\ITEM \STYLE{code} <cmnd t> \END Begins an incremental search down through the current buffer for the word or token under the cursor.
\ITEM \STYLE{code} <cmnd T> \END Reads a token or word under the cursor and lists all exact case-sensitive mathces in all open buffers.
\ITEM \STYLE{code} <cmnd u> \END Converts all ascii text in the range between the cursor and the mark to uppercase.
\ITEM \STYLE{code} <cmnd v> \END Paste from the top of clipboard and run auto-indent on the newly pasted text.
\ITEM \STYLE{code} <ctrl v> \END Toggles the current buffer's virtual whitespace status.
\ITEM \STYLE{code} <cmnd V> \END Paste the next item on the clipboard and run auto-indent on the newly pasted text.
\ITEM \STYLE{code} <cmnd x> \END Cut the text in the range from the cursor to the mark onto the clipboard.
\ITEM \STYLE{code} <cmnd y> \END Advances forewards through the undo history.
\ITEM \STYLE{code} <cmnd z> \END Advances backwards through the undo history.
\ITEM \STYLE{code} <cmnd 1> \END Set the other non-active panel to view the buffer that the active panel views, and switch to that panel.
\ITEM \STYLE{code} <cmnd 2> \END Set the other non-active panel to view the buffer that the active panel views, and switch to that panel.
\ITEM \STYLE{code} <cmnd ?> \END Toggles the current buffer's whitespace visibility status.
\ITEM \STYLE{code} <cmnd ~> \END Removes trailing whitespace from all lines in the current buffer.
\ITEM \STYLE{code} <return> \END If the buffer in the active view is writable, inserts a character, otherwise performs goto_jump_at_cursor.
\ITEM \STYLE{code} <shift return> \END If the buffer in the active view is writable, inserts a character, otherwise performs goto_jump_at_cursor_same_panel.
\ITEM \STYLE{code} <shift space> \END Inserts whatever character was used to trigger this command.
\END
\END
\SECTION{default-code-map}
The following commands only apply in files where the lexer (syntax highlighting) is turned on.
\LIST
\ITEM \STYLE{code} <cmnd right> \END Seek right for boundary between alphanumeric characters or camel case word and non-alphanumeric characters.
\ITEM \STYLE{code} <cmnd left> \END Seek left for boundary between alphanumeric characters or camel case word and non-alphanumeric characters.
\ITEM \STYLE{code} <return> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <shift return> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <}> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <)> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <]> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <;> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <#> \END Inserts a character and auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <tab> \END Iteratively tries completing the word to the left of the cursor with other words in open buffers that have the same prefix string.
\ITEM \STYLE{code} <cmnd tab> \END Auto-indents the range between the cursor and the mark.
\ITEM \STYLE{code} <shift tab> \END Auto-indents the line on which the cursor sits.
\ITEM \STYLE{code} <ctrl h> \END At the cursor, insert a '// HACK' comment, includes user name if it was specified in config.4coder.
\ITEM \STYLE{code} <ctrl r> \END At the cursor, insert a block comment.
\ITEM \STYLE{code} <ctrl t> \END At the cursor, insert a '// TODO' comment, includes user name if it was specified in config.4coder.
\ITEM \STYLE{code} <ctrl y> \END At the cursor, insert a '// NOTE' comment, includes user name if it was specified in config.4coder.
\ITEM \STYLE{code} <ctrl D> \END Queries user for string, lists all locations of strings that appear to define a type whose name matches the input string.
\ITEM \STYLE{code} <ctrl T> \END Reads a token or word under the cursor and lists all locations of strings that appear to define a type whose name matches it.
\ITEM \STYLE{code} <cmnd [> \END At the cursor, insert a '{' and '}' separated by a blank line.
\ITEM \STYLE{code} <cmnd {> \END At the cursor, insert a '{' and '};' separated by a blank line.
\ITEM \STYLE{code} <cmnd }> \END At the cursor, insert a '{' and '}break;' separated by a blank line.
\ITEM \STYLE{code} <ctrl [> \END Finds the scope enclosed by '{' '}' surrounding the cursor and puts the cursor and mark on the '{' and '}'.
\ITEM \STYLE{code} <ctrl ]> \END Finds the first scope started by '{' before the cursor and puts the cursor and mark on the '{' and '}'.
\ITEM \STYLE{code} <ctrl '> \END Finds the first scope started by '{' after the cursor and puts the cursor and mark on the '{' and '}'.
\ITEM \STYLE{code} <ctrl /> \END Wraps the code contained in the range between cursor and mark with a new curly brace scope.
\ITEM \STYLE{code} <ctrl -> \END Deletes the braces surrounding the currently selected scope. Leaves the contents within the scope.
\ITEM \STYLE{code} <ctrl j> \END If a scope is currently selected, and a statement or block statement is present below the current scope, the statement is moved into the scope.
\ITEM \STYLE{code} <ctrl i> \END Surround the range between the cursor and mark with an '#if 0' and an '#endif'
\ITEM \STYLE{code} <ctrl 1> \END Reads a filename from surrounding '"' characters and attempts to open the corresponding file.
\ITEM \STYLE{code} <ctrl 2> \END If the current file is a *.cpp or *.h, attempts to open the corresponding *.h or *.cpp file in the other view.
\ITEM \STYLE{code} <cmnd 0> \END At the cursor, insert a ' = {0};'.
\ITEM \STYLE{code} <cmnd I> \END Creates a jump list of lines of the current buffer that appear to define or declare functions.
\END
\END
\END