\INCLUDE{site_header.txt}

4coder version \VERSION

\SECTION{Built in Bindings}
 \ITEM \STYLE{code} "default" \END The standard bindings for Windows and Linux
 \ITEM \STYLE{code} "mac-default" \END The standard bindings reconfigured to be similar to other Mac applications
 \ITEM \STYLE{code} "mac-4coder-like" \END Bindings for Mac that make it very similar to use to 4coder on other OSes
\END

\SECTION{4coder Long Command}
Long name commands that can be typed in after using the "long command" command for infrequently triggered commands.
 \LIST
 \ITEM \STYLE{code} "load project" \END Load a project.4coder file, ditching any previously loaded project
 \ITEM \STYLE{code} "open all code" \END Open all code files in the current directory, extensions set in config.4coder, default to C/C++ extensions
 \ITEM \STYLE{code} "open all code recursive" \END Like \STYLE{code} "open all code" \END but recurses through folders
 \ITEM \STYLE{code} "dos lines" \END Switch the buffer to 'dos' line ending mode CRLF
 \ITEM \STYLE{code} "nix lines" \END Switch the buffer to 'nix' line ending mode LF
 \ITEM \STYLE{code} "remap" \END Change to one of the built in command bindings
 \ITEM \STYLE{code} "new project" \END Setup a new project.4coder and accompanying build scripts
 \END
\END

\SECTION{Map: default}

\SECTION{Global}
The following bindings apply in all situations.
 \LIST
 \ITEM \STYLE{code} <ctrl p> \END Create a new panel with a vertical split
 \ITEM \STYLE{code} <ctrl _> \END Create a new panel with a horizontal split
 \ITEM \STYLE{code} <ctrl P> \END Close a panel
 \ITEM \STYLE{code} <ctrl ,> \END Change active panel
 \ITEM \STYLE{code} <ctrl <> \END change active panel backwards
 
 \ITEM \STYLE{code} <ctrl n> \END New file dialogue
 \ITEM \STYLE{code} <ctrl o> \END Open file dialogue
 \ITEM \STYLE{code} <alt  o> \END Open file dialogue in other panel
 \ITEM \STYLE{code} <ctrl k> \END Kill buffer dialogue
 \ITEM \STYLE{code} <ctrl i> \END Switch open buffer dialogue
 \ITEM \STYLE{code} <ctrl w> \END 'Save As' - save file into new name
 \ITEM \STYLE{code} <ctrl h> \END Set hot directory to projet root directory
 \ITEM \STYLE{code} <ctrl S> \END Save all dirty buffers
 
 \ITEM \STYLE{code} <alt  c> \END Open color and font selection GUI
 \ITEM \STYLE{code} <alt  d> \END Open a debug information GUI
 
 \ITEM \STYLE{code} <alt  .> \END Change to footer build panel
 \ITEM \STYLE{code} <alt  ,> \END Close footer build panel
 \ITEM \STYLE{code} <alt  n> \END Goto next error/jump location
 \ITEM \STYLE{code} <alt  N> \END Goto previous error/jump location
 \ITEM \STYLE{code} <alt  M> \END Goto first error/jump location
 \ITEM \STYLE{code} <alt  m> \END Launch basic build (calls build.bat, build.sh, or Makefile)
 
 \ITEM \STYLE{code} <alt  z> \END Execute arbitrary shell/terminal command in arbitrary buffer
 \ITEM \STYLE{code} <alt  Z> \END Repeat previous shell/terminal command
 
 \ITEM \STYLE{code} <alt  x> \END Execute "long command" (see long command section)
 
 \ITEM \STYLE{code} <alt  s> \END Show scrollbar
 \ITEM \STYLE{code} <alt  w> \END Hide scrollbar
 \ITEM \STYLE{code} <alt  b> \END Toggle filebar
 
 \ITEM \STYLE{code} <alt  @> \END Toggle mouse input
 \ITEM \STYLE{code} <ctrl page up> \END Toggle fullscreen mode
 \ITEM \STYLE{code} <alt  E> \END Exit 4coder
 
 \ITEM \STYLE{code} <f1> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f2> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f3> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f4> \END Launch shell command set in a loaded project
 
 \ITEM \STYLE{code} <f5> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f6> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f7> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f8> \END Launch shell command set in a loaded project
 
 \ITEM \STYLE{code} <f9> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f10> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f11> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f12> \END Launch shell command set in a loaded project
 
 \ITEM \STYLE{code} <f13> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f14> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f15> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f16> \END Launch shell command set in a loaded project
 
 \END
\END

\SECTION{Text File}
The following bindings apply in general text files and most apply in code files, but some are overriden by other commands.
 \LIST
 \ITEM \STYLE{code} <any character> \END Insert character
 
 \ITEM \STYLE{code} <left click> \END Set cursor position to mouse position
 \ITEM \STYLE{code} <left release> \END Set mark position to mouse position
 \ITEM \STYLE{code} <right click> \END Set mark position to mouse position
 
 \ITEM \STYLE{code} <left> \END Move left
 \ITEM \STYLE{code} <right> \END Move right
 \ITEM \STYLE{code} <del> \END Delete character
 \ITEM \STYLE{code} <shift del> \END Delete character
 \ITEM \STYLE{code} <back> \END Backspace character
 \ITEM \STYLE{code} <shift back> \END Backspace character
 \ITEM \STYLE{code} <up> \END Move up
 \ITEM \STYLE{code} <down> \END Move up
 \ITEM \STYLE{code} <end> \END Move to end of line
 \ITEM \STYLE{code} <home> \END Move to beginning of line
 \ITEM \STYLE{code} <page up> \END Move up one whole page
 \ITEM \STYLE{code} <page down> \END Move down one whole page
 
 \ITEM \STYLE{code} <ctrl right> \END Seek right, stop at whitespace
 \ITEM \STYLE{code} <ctrl left> \END Seek left, stop at whitespace
 \ITEM \STYLE{code} <ctrl up> \END Seek up, stop at blank line
 \ITEM \STYLE{code} <ctrl down> \END Seek down, stop at blank line
 
 \ITEM \STYLE{code} <alt up> \END Move up ten lines
 \ITEM \STYLE{code} <alt down> \END Move down ten lines
 
 \ITEM \STYLE{code} <ctrl back> \END Delete word backwards
 \ITEM \STYLE{code} <ctrl del> \END Delete word forwards
 \ITEM \STYLE{code} <alt  back> \END Snipe token (or word) left
 \ITEM \STYLE{code} <alt  del> \END Snipe token (or word) right
 
 \ITEM Note: 'the range' in the following commands refers to the text between the mark and cursor.
 \ITEM \STYLE{code} <ctrl space> \END Set mark to the cursor position
 \ITEM \STYLE{code} <ctrl a> \END Replace a substring in the range
 \ITEM \STYLE{code} <ctrl c> \END Copy text from the range
 \ITEM \STYLE{code} <ctrl d> \END Delete the text in the range
 \ITEM \STYLE{code} <ctrl e> \END Center the active view on the cursor
 \ITEM \STYLE{code} <ctrl E> \END Move the view so that it's left edge is near the cursor's current x position
 \ITEM \STYLE{code} <ctrl f> \END Begin an incremental search through the current buffer
 \ITEM \STYLE{code} <ctrl F> \END Create a jump location list of all loaded exact matches of a string
 \ITEM \STYLE{code} <alt  F> \END Create a jump location list of all loaded substring matches of a string without case sensitivity
 \ITEM \STYLE{code} <ctrl g> \END Goto a specific line number
 \ITEM \STYLE{code} <ctrl j> \END Convert text in the range to lowercase
 \ITEM \STYLE{code} <ctrl K> \END Kill the current buffer
 \ITEM \STYLE{code} <ctrl l> \END Toggle line wrapping on the current buffer
 \ITEM \STYLE{code} <ctrl m> \END Swap the cursor and mark positions
 \ITEM \STYLE{code} <ctrl O> \END Reload the current buffer from the file system
 \ITEM \STYLE{code} <ctrl q> \END Begin an iterative query replace
 \ITEM \STYLE{code} <ctrl Q> \END Begin an iterative query replace to replace the word under the cursor
 \ITEM \STYLE{code} <ctrl r> \END Begin a reversed incremental search through the current buffer
 \ITEM \STYLE{code} <ctrl s> \END Save the current buffer with it's given filename
 \ITEM \STYLE{code} <ctrl t> \END Begin an incremenal search through the current buffer for the word under the cursor
 \ITEM \STYLE{code} <ctrl T> \END Create a jump location list of all loaded exact matches of the word under the cursor
 \ITEM \STYLE{code} <ctrl u> \END Convert text in the range to uppercase
 \ITEM \STYLE{code} <ctrl v> \END Paste from the clipboard
 \ITEM \STYLE{code} <alt  v> \END Toggle the virtual whitespace system
 \ITEM \STYLE{code} <ctrl V> \END Paste the next item on the clipboard, 4coder keeps a finite history of past 64 copies
 \ITEM \STYLE{code} <ctrl x> \END Copy text from the range and delete the range (aka cut)
 \ITEM \STYLE{code} <ctrl y> \END Redo
 \ITEM \STYLE{code} <ctrl z> \END Undo
 
 \ITEM \STYLE{code} <ctrl 2> \END Decrease the line wrap width for the current buffer
 \ITEM \STYLE{code} <ctrl 3> \END Increase the line wrap width for the current buffer
 
 \ITEM \STYLE{code} <ctrl ?> \END Toggle the show whitespace option
 \ITEM \STYLE{code} <ctrl ~> \END Clean trailing whitespace from all lines
 \ITEM \STYLE{code} <return> \END Interpret jump location under cursor and jump to it, lock the next/prev jump commands to this jump location list (only in read only files)
 \ITEM \STYLE{code} <shift return> \END Like previous command but tries to open the jump location in the view that currently holds the jump location list
 
 \END
\END

\SECTION{Code File}
The following commands only apply in C/C++ files where the lexer (syntax highlighting) is turned on.
 \LIST
 
 \ITEM \STYLE{code} <ctrl right> \END Seek right stop at alphanumeric or camel case
 \ITEM \STYLE{code} <ctrl left> \END Seek left stop at alphanumeric or camel case
 
 \ITEM \STYLE{code} <}> \END Insert character and trigger auto indentation
 \ITEM \STYLE{code} <)> \END Insert character and trigger auto indentation
 \ITEM \STYLE{code} <]> \END Insert character and trigger auto indentation
 \ITEM \STYLE{code} <;> \END Insert character and trigger auto indentation
 \ITEM \STYLE{code} <#> \END Insert character and trigger auto indentation
 
 \ITEM \STYLE{code} <tab> \END Automatically complete partial word
 \ITEM \STYLE{code} <ctrl tab> \END Auto indent the range
 \ITEM \STYLE{code} <shift tab> \END Auto indent the line at the cursor
 
 \ITEM \STYLE{code} <alt  h> \END Insert a HACK commment
 \ITEM \STYLE{code} <alt  r> \END Insert a block comment
 \ITEM \STYLE{code} <alt  t> \END Insert a TODO comment
 \ITEM \STYLE{code} <alt  y> \END Insert a NOTE comment
 \ITEM \STYLE{code} <ctrl [> \END Open a pair of braces
 \ITEM \STYLE{code} <ctrl {> \END Open a pair of braces ended with a semicolon
 \ITEM \STYLE{code} <ctrl }> \END Open a pair of braces ended with a break
 \ITEM \STYLE{code} <alt  i> \END Surround the range with #if 0 and #endif
 \ITEM \STYLE{code} <alt  1> \END Try to open a file named by the string surrounded by quotes under the cursor
 \ITEM \STYLE{code} <alt  2> \END Switch from .cpp \STYLE{code} <-> \END .h
 \ITEM \STYLE{code} <ctrl 0> \END Insert the characters " = {0};"
 \ITEM \STYLE{code} <ctrl I> \END List all function signatures in the current buffer
 
 \END
\END

\END

\SECTION{Map: mac-4coder-like}
This map is identical to "default" except that it uses different modifiers.

"ctrl" is replaced with "ctrl" OR "alt"
"alt" is replaced with "cmnd"

This setup is meant to match the jobs of the keys on the Mac keyboard to the jobs 
of the keys in the relatively same position on other keyboards.
\END

\SECTION{Map: mac-default}

\SECTION{Global}
The following bindings apply in all situations.
 \LIST
 \ITEM \STYLE{code} <cmnd p> \END Create a new panel with a vertical split
 \ITEM \STYLE{code} <cmnd _> \END Create a new panel with a horizontal split
 \ITEM \STYLE{code} <cmnd P> \END Close a panel
 \ITEM \STYLE{code} <cmnd ,> \END Change active panel
 \ITEM \STYLE{code} <cmnd <> \END change active panel backwards
 
 \ITEM \STYLE{code} <cmnd n> \END New file dialogue
 \ITEM \STYLE{code} <cmnd o> \END Open file dialogue
 \ITEM \STYLE{code} <ctrl o> \END Open file dialogue in other panel
 \ITEM \STYLE{code} <cmnd k> \END Kill buffer dialogue
 \ITEM \STYLE{code} <cmnd i> \END Switch open buffer dialogue
 \ITEM \STYLE{code} <cmnd w> \END 'Save As' - save file into new name
 \ITEM \STYLE{code} <cmnd h> \END Set hot directory to projet root directory
 
 \ITEM \STYLE{code} <ctrl c> \END Open color and font selection GUI
 \ITEM \STYLE{code} <ctrl d> \END Open a debug information GUI
 
 \ITEM \STYLE{code} <ctrl .> \END Change to footer build panel
 \ITEM \STYLE{code} <ctrl ,> \END Close footer build panel
 \ITEM \STYLE{code} <ctrl n> \END Goto next error/jump location
 \ITEM \STYLE{code} <ctrl N> \END Goto previous error/jump location
 \ITEM \STYLE{code} <ctrl M> \END Goto first error/jump location
 \ITEM \STYLE{code} <ctrl m> \END Launch basic build (calls build.bat, build.sh, or Makefile)
 
 \ITEM \STYLE{code} <ctrl z> \END Execute arbitrary shell/terminal command in arbitrary buffer
 \ITEM \STYLE{code} <ctrl Z> \END Repeat previous shell/terminal command
 
 \ITEM \STYLE{code} <ctrl x> \END Execute "long command" (see long command section)
 
 \ITEM \STYLE{code} <ctrl s> \END Show scrollbar
 \ITEM \STYLE{code} <ctrl w> \END Hide scrollbar
 \ITEM \STYLE{code} <ctrl b> \END Toggle filebar
 
 \ITEM \STYLE{code} <ctrl @> \END Toggle mouse input
 \ITEM \STYLE{code} <cmnd page up> \END Toggle fullscreen mode
 \ITEM \STYLE{code} <ctrl E> \END Exit 4coder
 
 \ITEM \STYLE{code} <f1> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f2> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f3> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f4> \END Launch shell command set in a loaded project
 
 \ITEM \STYLE{code} <f5> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f6> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f7> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f8> \END Launch shell command set in a loaded project
 
 \ITEM \STYLE{code} <f9> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f10> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f11> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f12> \END Launch shell command set in a loaded project
 
 \ITEM \STYLE{code} <f13> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f14> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f15> \END Launch shell command set in a loaded project
 \ITEM \STYLE{code} <f16> \END Launch shell command set in a loaded project
 
 \END
\END

\SECTION{Text File}
The following bindings apply in general text files and most apply in code files, but some are overriden by other commands.
 \LIST
 \ITEM \STYLE{code} <any character> \END Insert character
 
 \ITEM \STYLE{code} <left click> \END Set cursor position to mouse position
 \ITEM \STYLE{code} <left release> \END Set mark position to mouse position
 \ITEM \STYLE{code} <right click> \END Set mark position to mouse position
 
 \ITEM \STYLE{code} <left> \END Move left
 \ITEM \STYLE{code} <right> \END Move right
 \ITEM \STYLE{code} <del> \END Delete character
 \ITEM \STYLE{code} <shift del> \END Delete character
 \ITEM \STYLE{code} <back> \END Backspace character
 \ITEM \STYLE{code} <shift back> \END Backspace character
 \ITEM \STYLE{code} <up> \END Move up
 \ITEM \STYLE{code} <down> \END Move up
 \ITEM \STYLE{code} <end> \END Move to end of line
 \ITEM \STYLE{code} <home> \END Move to beginning of line
 \ITEM \STYLE{code} <page up> \END Move up one whole page
 \ITEM \STYLE{code} <page down> \END Move down one whole page
 
 \ITEM \STYLE{code} <cmnd right> \END Seek right, stop at whitespace
 \ITEM \STYLE{code} <cmnd left> \END Seek left, stop at whitespace
 \ITEM \STYLE{code} <cmnd up> \END Seek up, stop at blank line
 \ITEM \STYLE{code} <cmnd down> \END Seek down, stop at blank line
 
 \ITEM \STYLE{code} <alt  up> \END Move up ten lines
 \ITEM \STYLE{code} <alt  down> \END Move down ten lines
 
 \ITEM \STYLE{code} <cmnd back> \END Delete word backwards
 \ITEM \STYLE{code} <cmnd del> \END Delete word forwards
 \ITEM \STYLE{code} <ctrl back> \END Snipe token (or word) left
 \ITEM \STYLE{code} <ctrl del> \END Snipe token (or word) right
 
 \ITEM Note: 'the range' in the following commands refers to the text between the mark and cursor.
 \ITEM \STYLE{code} <ctrl space> \END Set mark to the cursor position
 \ITEM \STYLE{code} <cmnd a> \END Replace a substring in the range
 \ITEM \STYLE{code} <cmnd c> \END Copy text from the range
 \ITEM \STYLE{code} <cmnd d> \END Delete the text in the range
 \ITEM \STYLE{code} <cmnd e> \END Center the active view on the cursor
 \ITEM \STYLE{code} <cmnd E> \END Move the view so that it's left edge is near the cursor's current x position
 \ITEM \STYLE{code} <cmnd f> \END Begin an incremental search through the current buffer
 \ITEM \STYLE{code} <cmnd F> \END Create a jump location list of all loaded exact matches of a string
 \ITEM \STYLE{code} <ctrl F> \END Create a jump location list of all loaded substring matches of a string without case sensitivity
 \ITEM \STYLE{code} <cmnd g> \END Goto a specific line number
 \ITEM \STYLE{code} <cmnd j> \END Convert text in the range to lowercase
 \ITEM \STYLE{code} <cmnd K> \END Kill the current buffer
 \ITEM \STYLE{code} <cmnd l> \END Toggle line wrapping on the current buffer
 \ITEM \STYLE{code} <cmnd m> \END Swap the cursor and mark positions
 \ITEM \STYLE{code} <cmnd O> \END Reload the current buffer from the file system
 \ITEM \STYLE{code} <cmnd q> \END Begin an iterative query replace
 \ITEM \STYLE{code} <cmnd Q> \END Begin an iterative query replace to replace the word under the cursor
 \ITEM \STYLE{code} <cmnd r> \END Begin a reversed incremental search through the current buffer
 \ITEM \STYLE{code} <cmnd s> \END Save the current buffer with it's given filename
 \ITEM \STYLE{code} <cmnd t> \END Begin an incremenal search through the current buffer for the word under the cursor
 \ITEM \STYLE{code} <cmnd T> \END Create a jump location list of all loaded exact matches of the word under the cursor
 \ITEM \STYLE{code} <cmnd u> \END Convert text in the range to uppercase
 \ITEM \STYLE{code} <cmnd v> \END Paste from the clipboard
 \ITEM \STYLE{code} <ctrl v> \END Toggle the virtual whitespace system
 \ITEM \STYLE{code} <cmnd V> \END Paste the next item on the clipboard, 4coder keeps a finite history of past 64 copies
 \ITEM \STYLE{code} <cmnd x> \END Copy text from the range and delete the range (aka cut)
 \ITEM \STYLE{code} <cmnd y> \END Redo
 \ITEM \STYLE{code} <cmnd z> \END Undo
 
 \ITEM \STYLE{code} <cmnd 2> \END Decrease the line wrap width for the current buffer
 \ITEM \STYLE{code} <cmnd 3> \END Increase the line wrap width for the current buffer
 
 \ITEM \STYLE{code} <cmnd ?> \END Toggle the show whitespace option
 \ITEM \STYLE{code} <cmnd ~> \END Clean trailing whitespace from all lines
 \ITEM \STYLE{code} <return> \END Interpret jump location under cursor and jump to it, lock the next/prev jump commands to this jump location list (only in read only files)
 \ITEM \STYLE{code} <shift return> \END Like previous command but tries to open the jump location in the view that currently holds the jump location list
 
 \END
\END

\SECTION{Code File}
The following commands only apply in C/C++ files where the lexer (syntax highlighting) is turned on.
 \LIST
 
 \ITEM \STYLE{code} <cmnd right> \END Seek right stop at alphanumeric or camel case
 \ITEM \STYLE{code} <cmnd left> \END Seek left stop at alphanumeric or camel case
 
 \ITEM \STYLE{code} <}> \END Insert character and trigger auto indentation
 \ITEM \STYLE{code} <)> \END Insert character and trigger auto indentation
 \ITEM \STYLE{code} <]> \END Insert character and trigger auto indentation
 \ITEM \STYLE{code} <;> \END Insert character and trigger auto indentation
 \ITEM \STYLE{code} <#> \END Insert character and trigger auto indentation
 
 \ITEM \STYLE{code} <tab> \END Automatically complete partial word
 \ITEM \STYLE{code} <cmnd tab> \END Auto indent the range
 \ITEM \STYLE{code} <shift tab> \END Auto indent the line at the cursor
 
 \ITEM \STYLE{code} <ctrl h> \END Insert a HACK comment
 \ITEM \STYLE{code} <ctrl r> \END Insert a block comment
 \ITEM \STYLE{code} <ctrl t> \END Insert a TODO comment
 \ITEM \STYLE{code} <ctrl y> \END Insert a NOTE comment
 \ITEM \STYLE{code} <cmnd [> \END Open a pair of braces
 \ITEM \STYLE{code} <cmnd {> \END Open a pair of braces ended with a semicolon
 \ITEM \STYLE{code} <cmnd }> \END Open a pair of braces ended with a break
 \ITEM \STYLE{code} <ctrl i> \END Surround the range with #if 0 and #endif
 \ITEM \STYLE{code} <ctrl 1> \END Try to open a file named by the string surrounded by quotes under the cursor
 \ITEM \STYLE{code} <ctrl 2> \END Switch from .cpp \STYLE{code} <-> \END .h
 \ITEM \STYLE{code} <cmnd 0> \END Insert the characters " = {0};"
 \ITEM \STYLE{code} <cmnd I> \END List all function signatures in the current buffer
 
 \END
\END

\END